I am in the process of making some changes and additions to this post. Please bear with me.
I have already written about making a Toilet Silent Fill Valve Repair, but whether a toilet fill valve is silent or not it can’t always be repaired. So I have written this article about replacing a toilet fill valve to help those who need to get a new one.
“This operation can involve spilling CLEAN water. So be warned and be prepared.”— HC
This article is in effect an addendum to the post Toilet Silent Fill Valve Repair which explains how to access and dismantle such a valve and inspect or change the diaphragm that sits in the valve. That post also explains what is, and is not, silent about a Silent Fill Valve. This is now complemented by the post Replacing A Toilet Fill Valve.
In order to satisfy the requirements of Internet SEO (Search Engine Optimisation) the valve is referred to, in this article, specifically as a Toilet Silent Fill Valve or more generally Silent Fill Valve but its full title is a Silent Fill Toilet Cistern Inlet Valve since it is:
An Inlet Valve.
A Cistern Inlet Valve.
A Toilet Cistern Inlet Valve.
A Silent Fill Toilet Cistern Inlet Valve.
This type of valve is complex and deploys a built-in mechanism which uses the inherent water pressure in the Mains Water to drive the valve from the closed to open position and then from the open to closed position. The mechanism is controlled by a much smaller valve in the form of a stopper covering a pinhole which requires a much smaller effort to operate it than the main valve.
The article endeavours to explain to the reader how the complete valve works so that they understand the order in which physical processes take place and why they follow on from each other as they do. The theory behind the workings of the valve are developed from the basic principles of forces and pressures acting on the individual parts but without the detail of too many mathematical formulae. Continue reading “How A Toilet Silent Fill Valve Works”
I recently heard my cistern overflowing. On investigation I decided to adjust the float level to stop it by reducing the height to which the water in the cistern rose when it filled. A few days later I heard the distinct sound of the cistern overflowing again. I then realised I needed to repair my Toilet Silent Fill Valve.
If you have tried dual flush toilet cistern lid removal you may have found that it was held down by something. But what? There are no clips or screws.
Traditional porcelain cisterns flushed with a handle have their lids held down by gravity.
Some Dual Flush toilet cisterns, like my Armitage Shanks1 Ascania have their lids held in place by the Geberit Flush Button Mechanism2. The Button Socket, mounted in the cistern lid, is held down by a plastic screw attached to an internal part within the cistern.
This article gives advice on this type of dual flush toilet cistern lid removal.