watchmaker's screwdrivers Archives

Introduction

I ended up lubricating the heat sink fan on an NVIDIA GeForce GTS240 whilst looking for the cause of a PC error from it.

During the last couple of months I had some serious errors (about 4) reported on my HP Z620 PC.

These were two of the error reports:

928 – Fatal PCIe error. PCIe error detected Slot 2 Completion timeout.
928 – Fatal PCIe error. PCIe error detected Slot 2 Surprise link down error.

All the errors pointed to either a Slot 2 problem or a problem with my NVIDIA GeForce GTS240 Display Adapter in that slot. I hoped the problem (which is intermittent and very occasional) would go away if I reseated the Display Adapter in its PCIe card slot.

This article describes what I did next and how I ended up lubricating the heat sink fan.

Select Posts by Category?

My Latest News

3rd June 2019: I’ve had a go at making testimonials look better. The previous method was a mess so I’ve used the Kadence Testimonials block to produce a testimonials page with two neat columns which are now accessed from the Posts menu since they all originate via Post Comments.

1st June 2019: Continuing to edit using blocks I have changed to a Kadence FAQ block to display Frequently Asked Questions and their answers. I spotted a problem with the accordion block and Ben Ritner has very kindly edited the block to resolve it. There has been some editing of the Qs & As and you might find I mess with it some more.

I have also begun using the Contents Table block by Ultimate Addons for Gutenberg to show the contents of my posts. I am inserting this block after the Introduction. If I put it first as it would be in a book it causes some issues:

In my list of posts that is shown in reverse date order I only want the Introduction or part thereof to be seen. If I put the contents block first that will be seen. It will take up a lot of screen space and won’t be very interesting.
The contents block links to all the headings used in the post but that doesn’t work when it’s viewed in the list of post snippets described in 1 above.

1st February 2019: I have just deleted a file named wordfenceScanner.php.bin from my PHP .opcache folder on my server. Wordfence had detected it contained the TimThumb script which is considered to be unsafe. I must look into methods of cleaning my PHP cache. It looks as if it contains some outdated files.

2nd January 2019: Again I couldn’t get my WP v5.0.1 to update to v5.0.2 so I followed Wordfence’s instructions and upgraded it manually. I made a good job of it and searched for the cause of the problem. It turned out to be caused by the plugin DGXPCO which is designed to improve Core update security.

Hopefully if the Core updating server got hacked and a false Core program was sent this plugin wouldn’t allow it to be applied due to manual intervention. Well that manual intervention failed to allow valid Core updates through so I have deactivated that plugin for the time being.

Continue to My Latest News Archive.

Site Construction

The site helpfulcolin.com was originally built in September 2011 by Digitalog© using the Side Blog theme and handed over to Helpful Colin by his mentors (see their links below) in December 2011. It was changed to a ‘Twenty Fourteen’ child theme in February 2014 by Helpful Colin.

The latest major change took place in December 2015 when WordPress version 4.4 became active and Helpful Colin changed the theme to the ‘Twenty Sixteen’ theme which is designed to look good on all screen sizes. Although this may have improved the blog for mobile users it has removed some functionality available in ‘Twenty Fourteen’.

Tag: watchmaker’s screwdrivers

Lubricating The Heat Sink Fan On A GeForce GTS240

Introduction